KaosKaizer Posted July 26, 2011 Share Posted July 26, 2011 Okay, Ryoku. I finally had the time to re-install it. I have it installed with the warps still warping. I'm not sure what happened my first two installations, but I think it was me accidentally replacing the wrong code. Thanks for the tut, I love it! Link to comment Share on other sites More sharing options...
RyokuHasu Posted July 26, 2011 Author Share Posted July 26, 2011 Glad you liked it ^_^ Link to comment Share on other sites More sharing options...
Sunku Posted July 27, 2011 Share Posted July 27, 2011 Error:>! ![](http://www.freemmorpgmaker.com/files/imagehost/pics/214b2822bac94bc89a866af1cb5c7a3a.bmp) Link to comment Share on other sites More sharing options...
Justn Posted July 27, 2011 Share Posted July 27, 2011 are u sure u addedPublic Doors(1 To MAX_DOORS) As DoorRecin modtypes above ' client-side stuff??? Link to comment Share on other sites More sharing options...
RyokuHasu Posted July 27, 2011 Author Share Posted July 27, 2011 Yes that part says to add it on both the server and client. =oplease check on that part. Link to comment Share on other sites More sharing options...
SawQuart Posted July 28, 2011 Share Posted July 28, 2011 I get this problem whenever I try to compile. What did I do wrong with that step?[![](http://www.freemmorpgmaker.com/files/imagehost/pics/811dcbaa91bc0af1daa70bedb724d710.PNG)](http://www.freemmorpgmaker.com/files/imagehost/#811dcbaa91bc0af1daa70bedb724d710.PNG) Link to comment Share on other sites More sharing options...
Justn Posted July 28, 2011 Share Posted July 28, 2011 @JungleWell you didnt put that part in the right spot.. this part >! ' door If frmEditor_Map.optDoor.Value Then .Type = TILE_TYPE_DOOR .Data1 = DoorEditorNum .Data2 = 0 .Data3 = 0 End Ifshould go a little further down under this>! ' resource If frmEditor_Map.optResource.Value Then .Type = TILE_TYPE_RESOURCE .Data1 = ResourceEditorNum .Data2 = 0 .Data3 = 0 End Ifreplacing the old door code Link to comment Share on other sites More sharing options...
RyokuHasu Posted July 29, 2011 Author Share Posted July 29, 2011 Thanks for explaining that. I'm pretty sure it was explained in the tutorial… ill re-read what i wrote.\* * *Ya thanks Justn, I did explain it in the tut, thanks for the help re-explaining it. ^_^ Link to comment Share on other sites More sharing options...
SawQuart Posted July 29, 2011 Share Posted July 29, 2011 Thanks for the help guys! I'm getting another error with FrmEditor_Doors. I'm guessing it's because I didn't name a frm correctly, but I'm not sure. It's on that part where you tell us to add that code to the bottom of modGameEditors.[![](http://www.freemmorpgmaker.com/files/imagehost/pics/d178ac55877eaffe7d08bf87855ebdba.PNG)](http://www.freemmorpgmaker.com/files/imagehost/#d178ac55877eaffe7d08bf87855ebdba.PNG) Link to comment Share on other sites More sharing options...
The New World Posted July 29, 2011 Share Posted July 29, 2011 It means frmEditor_Doors does not exist under that current declaration. (name) Link to comment Share on other sites More sharing options...
RyokuHasu Posted July 29, 2011 Author Share Posted July 29, 2011 @Jungle: Did you add In the Editor correctly? Its saying that the Editor doesn't exist in your project, I included it in the attachment and gave a link to it in the tut. Link to comment Share on other sites More sharing options...
SawQuart Posted July 29, 2011 Share Posted July 29, 2011 @RyokuHasu:> @Jungle: Did you add In the Editor correctly? Its saying that the Editor doesn't exist in your project, I included it in the attachment and gave a link to it in the tut.I'm almost positive I added it… that's odd. I have two projects running (dev and unaltered), so I probably added it to the wrong project. My bad. Thanks for being so helpful though. Link to comment Share on other sites More sharing options...
SpiceyWolf Posted August 1, 2011 Share Posted August 1, 2011 i really want to use this door thingy soooo badly but im getting an error on that extremely long code u had me put in the case dir area…. its on all four directions it gives me this error... im tryna fix it on my own but it dont seem to work... heres a pic... Link to comment Share on other sites More sharing options...
erkro1 Posted August 1, 2011 Share Posted August 1, 2011 Spicey, give us the error too. Link to comment Share on other sites More sharing options...
RyokuHasu Posted August 1, 2011 Author Share Posted August 1, 2011 did it say what kind of error it was?(ie: Subscript out of range, Variable not defined, ect.) Link to comment Share on other sites More sharing options...
SpiceyWolf Posted August 1, 2011 Share Posted August 1, 2011 it was rte 9 Link to comment Share on other sites More sharing options...
RyokuHasu Posted August 1, 2011 Author Share Posted August 1, 2011 =_= ~~and which one is that?~~Never ming i found it on google, Subscript out of range. Hmmmm…ok, when the error happens and the line is highlighted drag your mouse over each part of the line slowly, it will start showing you what every value is, when you get to the part that fills in as then tell me that one single part.=/ because since every one else has no problems with it, its either the version of EO your using, or you installed it wrong. Link to comment Share on other sites More sharing options...
SpiceyWolf Posted August 2, 2011 Share Posted August 2, 2011 kk i have to redo adding all the code again >.> if i dont get the problem again ill let u know XD but i just grabbed a fresh copy of eo so unless thats for an older one thats not the problem Link to comment Share on other sites More sharing options...
RyokuHasu Posted August 2, 2011 Author Share Posted August 2, 2011 nope its for EO2.0 =D Link to comment Share on other sites More sharing options...
SpiceyWolf Posted August 2, 2011 Share Posted August 2, 2011 lol i meant fresh eo2.0and anyway i finally added it all(went some places >.>) so sorry it took a while to get to u again…i probably should explained a lil more about the prob... its if i try to use a key or walk on a switch from the south side of attribute... and the left one it gives me that error... the top and right side dont seem to do that...and about that thing u were tellin me... the only stuff that comes up is index = 1 on each index word... and on bright red it sais brightred = 12any clue what my prob is?ALSO i forgot to add it seems if i take out that yellow line it doesnt give me that problem but it will give me another error on actually using the switch >.> Link to comment Share on other sites More sharing options...
RyokuHasu Posted August 2, 2011 Author Share Posted August 2, 2011 x.x I have no idea what to tell you =/ That chunk of code was just improvised at the last minute. I cant really say its my fault because others say it works perfectly. Sorry to tell you this, and not even I want to say it, you might want to give up on doors for right now. Link to comment Share on other sites More sharing options...
SpiceyWolf Posted August 2, 2011 Share Posted August 2, 2011 lol it looks to me like that part is only a messege? is it possible to just make it not give a messege? X.X i dont even want a messege in there anyway… could i just delete that line altogether and not have an issue?EDIT: forgot to say, i can do with the error on the switch all i gotta do is put directional block since they shouldnt walk on it anyway... but the key is only one having that prob now. Link to comment Share on other sites More sharing options...
RyokuHasu Posted August 12, 2011 Author Share Posted August 12, 2011 =/ Well, your the only one that's had that problem. I really don't know what to tell you.(yes im late, and yes this is bumping it) Link to comment Share on other sites More sharing options...
Guest Posted August 18, 2011 Share Posted August 18, 2011 so if you walk onto a switch tile i get a subscript out of range 9 server side, however if i set blocks and just interact with it, it works fine. duno if that was me or just not added yet.and when you make a door, exit the game and go back in your door is gone. Link to comment Share on other sites More sharing options...
Olimar72 Posted August 18, 2011 Share Posted August 18, 2011 Would you mind make the part about making the door frame more detailed? I'm new to VB6\. I figure that would be a good way to learn. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now