Slasheree Posted July 29, 2012 Author Share Posted July 29, 2012 I have a few questions about the engine.1- What is the purpose of the Boot Settings ( Boot Map, Boot X, Boot Y )2- What does the Moral: Boss Chamber do ?3- I created an NPC to be a Boss and set to 'Attack on sight' and ajusted the range but it doesn't come to me, what might cause that ? My character level is higher ? Link to comment Share on other sites More sharing options...
Jumpahead Posted July 29, 2012 Share Posted July 29, 2012 Hello Slasher.May I just state that crystalshire is a more advanced engine and it is unfinished. I believe the boss systems were not completed so that answers question's 2 and 3. Link to comment Share on other sites More sharing options...
tslusny Posted July 29, 2012 Share Posted July 29, 2012 @Jumpahead:> Hello Slasher.> May I just state that crystalshire is a more advanced engine and it is unfinished. I believe the boss systems were not completed so that answers question's 2 and 3.boss map means there is one boss npc and other npcs are normal but when you kill that other npcs they wont respawn until boss is killed Link to comment Share on other sites More sharing options...
hisherwin Posted July 31, 2012 Share Posted July 31, 2012 Boot map is not only on CrystalShire Developer Engine , It is on whole Eclipse Engine , Well boot map is where we set the respawn point , For example if you set the boot map = 1 Boot x = 15 boot y = 16 , If you died you will respawn on that map .. Its good for arena and more.. And about that Range , If the range is 5 that means he will come to you if you are 4 tiles away from it..hope it helps–-----Sorry my bad at english Link to comment Share on other sites More sharing options...
Vus Posted July 31, 2012 Share Posted July 31, 2012 @Slasher:> I have a few questions about the engine.> 1- What is the purpose of the Boot Settings ( Boot Map, Boot X, Boot Y )> 2- What does the Moral: Boss Chamber do ?> 3- I created an NPC to be a Boss and set to 'Attack on sight' and ajusted the range but it doesn't come to me, what might cause that ? My character level is higher ?1\. As Sherwin explained, this is respawn point2\. As Dethbeam explained.3\. It may be because you are admin, attack on sight npcs wont attack you if you are admin Link to comment Share on other sites More sharing options...
Slasheree Posted July 31, 2012 Author Share Posted July 31, 2012 Can someone tell me how the npc drop rates work, I tried putting 50 for 50% but it won't let me, I put 0,5 and it won't drop. ._. Link to comment Share on other sites More sharing options...
Ruins of Hell Posted July 31, 2012 Share Posted July 31, 2012 Either do a decimal in the form of:* 0.### (e.g., .5) A fraction:* ###/### (e.g., 1/2) A percent:* ##% (e.g., 50%) Link to comment Share on other sites More sharing options...
Slasheree Posted July 31, 2012 Author Share Posted July 31, 2012 Thank you, could you also tell me how to edit conversations ? Link to comment Share on other sites More sharing options...
Ruins of Hell Posted July 31, 2012 Share Posted July 31, 2012 /editconv Link to comment Share on other sites More sharing options...
Slasheree Posted July 31, 2012 Author Share Posted July 31, 2012 I really knew a button was missing on the admin panel xD ( Thank you ) Link to comment Share on other sites More sharing options...
Slasheree Posted July 31, 2012 Author Share Posted July 31, 2012 how do I make a NPC start a conversation, I put in the NPC data but it won't start Link to comment Share on other sites More sharing options...
abhi2011 Posted August 1, 2012 Share Posted August 1, 2012 Make a conv set the conv as NPC's. Walk to npc and press 'ctrl' Link to comment Share on other sites More sharing options...
hisherwin Posted August 1, 2012 Share Posted August 1, 2012 put a range.. range must be less than 1 and health 5 Link to comment Share on other sites More sharing options...
Slasheree Posted August 1, 2012 Author Share Posted August 1, 2012 @Sherwin:> put a range.. range must be less than 1 and health 5Less than 1 it's 0, how's that a range ? I tried 1 and 0 with 5 health, still not working… ._. Link to comment Share on other sites More sharing options...
abhi2011 Posted August 1, 2012 Share Posted August 1, 2012 Did you actually set a conv for the npc? Link to comment Share on other sites More sharing options...
Slasheree Posted August 1, 2012 Author Share Posted August 1, 2012 yes, it has 1 speech and 1 answer Link to comment Share on other sites More sharing options...
Slasheree Posted August 1, 2012 Author Share Posted August 1, 2012 fixed it, theres an option in the conversation's answer where it have None and 1, I had 1 and it didn't work, switched to None and worked. ( I don't really recall if it was None and 1, but the 1st option is the right one ) Link to comment Share on other sites More sharing options...
Slasheree Posted August 2, 2012 Author Share Posted August 2, 2012 @Deathbeam:> boss map means there is one boss npc and other npcs are normal but when you kill that other npcs they wont respawn until boss is killedI guess there's something wrong in mine, when I kill small enemies they still respawn, but when I kill the boss they all die too ._. Link to comment Share on other sites More sharing options...
Ruins of Hell Posted August 2, 2012 Share Posted August 2, 2012 @Slasher:> I guess there's something wrong in mine, when I kill small enemies they still respawn, but when I kill the boss they all die too ._.I think that's the idea behind the boss map, as opposed to Deathbeam's reply. Link to comment Share on other sites More sharing options...
Slasheree Posted August 2, 2012 Author Share Posted August 2, 2012 guess I'll just have to live with it, or maybe add new map moral in the future, thx for the help Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now