or3o

@'laywen': > i have gone through your entire site and im not joking when i say 99 percent of all your members are rude as fuck i will never use this engine now will i ever come back to your shit show site where did real eclipse go you people are just silly lil kids who think your important jeez get a life this engine died 10 years ago fuckin losers no one cares, if you dont like it here leave.

Hi guys, I am currently working on a raspberry pi project and i figure i should make some kind of tutorial or build log, so here it is. This project started when i orderd 8 broken gamegears on ebay. I was able to fix all of them but 1. [](http://postimg.org/image/ambqvvqut/) The gamegear looked ok on the outside but the inside was bad. The batteries has leaked all over everything. [](http://postimg.org/image/4l16pvlt3/) At this point I decided to make my own handheld. I knew i would need a few parts and a ton of time. The parts i orderd where 12 tactile switches (i got surface mount because its all radioshack carried. Thru hole would be way easier.) a 5 inch hdmi lcd display from ebay (it was about 25 dollars) A raspberry pi 2 a micro sd card a usb lipo charging circut a 3.7volt to 5 volt step up converter a replacement laptop battery a 3 watt audio amplifier circut and a micro usb externsion cable. (this project also required som old video game controllers but that is dependant on how many buttons you plan on adding) I began but cutting up a fake snes controller so i could take the shoulder buttons and the abxy [](http://postimg.org/image/fyzhkksg1/) [](http://postimg.org/image/hh15p7xmj/) i used a dremel to cut out the area around the buttons so they would work as normal i did the same to a playstation 1 controller to get the l2 and r2 buttons. I replaced the original buttons with tactile switches [](http://postimg.org/image/o07vilfsr/) I cut out the areas where i wanted to add buttons and used hot glue to tack everything in place. Once I got a fitment I liked I began doing layers of JB weld. This is the part that takes the longest. I would do a layer, sand it back and repeat until you have the contours you like. I spent about 10 hours doing this, Once it is smooth enough you can start applying primer. Then you get out some fine grit sand paper and sand it back do as many layers as you need to for smoothness. [](http://postimg.org/image/s7hr9apkx/) [](http://postimg.org/image/rfcxju2i5/) I took this time to cut out the screen area. Then i began to test fit everything. [](http://postimg.org/image/fmob7ham3/) For the battery setup I took a laptop battery and tore it apart. (laptop batteries are made of 3.7volt 18650 batteries wired in series. Just break them down to single 18650 cells. Then I began some soldering for the buttons [](http://postimg.org/image/xx50v7hff/) I wired it so all of the buttons share a common ground (meaning less wires.) I took note of the wiring colors I used because it becomes important later. Then I hotglued the pcbs in place behind the switches. [](http://postimg.org/image/ey0e8asax/) I then used hotglue to tack the screen and batteries in place and test fit with all the batteries. (the batterys are going to be fired in parallel giving my 9ah of battery power.) [](http://postimg.org/image/6cikznvs3/) Test booted the system after installing a retropie image to the sd card ( i will go into more detail on this soon) [](http://postimg.org/image/rzq2ttfwv/) This project isnt done. the list of crap i need to finish is solder button connections directly to the gpio pins. solder in the charging circut and make a charging port in the case and possibly order a new screen. solder in audio amp and headphone jack. If anyone has any questions feel free to ask

@'RunescapeGuy': > Yes…I am going to be THAT guy that bumps this thread from years ago...I just wanted to mention that there is a runescape classic private server that allows you to play on your android device. Even though runescape classic has is 15 years old doesn't mean you shouldn't give it a try again! It's a small community, but a great one. Come check it out at http://www.rscrevolution.com -- my username is Asylum your better off starting a new thread, I haven seen most of the people who commented on this in like 6 years.

I am in only if the ultimate badguy is apple.

[](http://postimg.org/image/hr6qs41wf/) i used gimp for this

….open in visual basic, press run for both client and server and show us where it hangs up.

run it in ide and see what pops up

Hopefully this "resource limit reached" error on the site gets sorted out. I come to this site almost daily just to chat with friends and all i ever see anymore are people in the shout box begging for help, They don't seem appreciative at all. Some of the new users just expect everything to be done for them and that kinda bothers me. Its painful to watch people start working with our antiquated engine knowing that by the time a new user gets proficient with it they will realize how outdated it really is. I hope something can be done because I love this site.

Happy April fools?

Hey look up Fran Blanche on youtube, I have been watching her electronics videos for months (she is an electrical engineer) and just today I found out she is transgender, She is one of the smartest people i have ever learned from and she has some insight to anything you may be going through. Plus she is fucking awsome.

I believe avatar is actually american, but i have to say Ghost in the shell, akira are good to check out.

@'SkywardRiver': > Use the Ctrl Key man :D @'Thuixi007': > how to use default attatk :D :D :D :D :D :D ????

I actually have that same npc issue!

@'Suky': > You can move the skill system with skill window from EFF to Skywyre enginw or this is a big feature? > > Thanks! :D if you need more details i can talk with you on skype Thats a pretty big Feature to be honest.

I think he made a resource and forgot to give it an hp so it freaked out, ill see if its a bug and post an appropriate fix

I gotta go somewhere for a few hours, when I get back ill check it out for you.

@'gallighanmaker': > Thank you, if you happen to find any further modification inform us. Of course, if Skyward is cool with it whenever there is an update ill post the source changes here for anyone who needs em.

Yea those are all the changes i found.

Not sure how but i fixed it, rolled back to an earlier version and readded the stuff i had lost

@'Growlith1223': > Delete the current npc files, whenever these lines error, this means that you added onto an area of the udt somewhere above the bottom I have already tried it :/

I am getting a rte 9 when i save an npc (eclipse skywyer v7) I havent edit anything npc related. It breaks on SERVER SIDE ``` CopyMemory ByVal VarPtr(NPC(NPCNum)), ByVal VarPtr(NPCData(0)), NPCSize ```when I hover over``` ByVal VarPtr(NPCData(0)) ``` it says 'npcdata(0) = subscript out of range." on a clean version when I saved that number was 84. i compared NPCsize to a clean version of eclipse. when saving the npcsize value is 548 on a clean version and 556 on my version. Anyway i just wonder if anyone has any ideas on where to look around for the source of this error. Thanks for taking the time to read this.

If you need help with programing feel free to message me, I need something to keep me busy in my down time.

http://www.freemmorpgmaker.com/thread-4263.html?highlight=Adding+Real+Defense check this out, about halfway down the post someone put a tutorial. http://www.freemmorpgmaker.com/thread-16776.html found it.

You should make the game a story book, and have the quests split into chapters, i think that could be really interesting.

just download winmerge , and compare its files to a version 6 client, it will highlight the differences in the code. This is the changes I could find. client side in mod game logic find ``` ' check directional blocking ``` under it add ``` If GetPlayerX(MyIndex) > Map.MaxX Then Exit Function If GetPlayerY(MyIndex) > Map.MaxY Then Exit Function ``` ' check directional blocking mod handle data in handle chat bubble under ``` AddChatBubble target, TargetType, Message, Colour Set buffer = Nothing ```add``` Exit Sub ``` then in sub handle special effect under ``` End Select Set buffer = Nothing ```add ``` Exit Sub ```